What Weight Is Good For A Hunting Bow]?

As a rule of thumb, 40 pounds of kinetic energy efficiently kills whitetails, and 50 pounds or greater is required for larger game such as elk, moose or bear. When I bought my first Mathews bow, it had a 70-pound draw weight.

Can you hunt with a 25lb bow?

The bottom line is: as long as you are only looking to do some target practice and do not plan to do any hunting, #30 and #25 pounders will do just fine.

Is a 35 pound bow good for hunting?

That’s not to say shooting adequate poundage isn’t important when bowhunting — it is, but primarily because it’s a large factor in the amount of kinetic energy a bow and arrow setup can produce. But, a skilled shooter with a 35-pound bow is very likely to kill a deer when shooting at it from 10 or 15 yards.

Is a 60 lb bow enough for elk?

For whitetail deer hunting anything above 40 lbs is fine. For larger game such as elk or moose a good recommendation is at least 60-65 lbs of draw weight. A general rule of thumb is that a shooter should be able to shoot a bow about 30 times in a row without being fatigued.

You might be interested:  Often asked: When Is Deer Hunting Season In Iowa?

Is a 50lb bow too much?

Check your accuracy with bows of varying draw weights. If you’re pretty consistent at 40 pounds, but then notice erratic arrow groups at 50 pounds, then 50 pounds is probably too much weight. Those who shoot one-piece recurves or longbows are going to have to switch bows.

Is 70 lb draw too much?

For example, a bow with a 70-pound peak weight and a 80% let-off should have a holding weight of around 14-pounds. Being able to hold a bow at full draw for 30 seconds is great, but if you’re shaking, struggling, and exhausted at the end of that time, then you’re not going to be able to make an ethical shot.

How hard is it to pull back a 40 pound bow?

The draw weight is basically, “How strong do I need to be in order to pull this thing back?” For a recurve bow, it’s measured by pulling back to 28 inches. So for a 40 lb bow, it means that it takes 40 lbs of force to pull back the string 28 inches for a recurve.

What is the best poundage for a bow?

As a rule of thumb, 40 pounds of kinetic energy efficiently kills whitetails, and 50 pounds or greater is required for larger game such as elk, moose or bear. When I bought my first Mathews bow, it had a 70-pound draw weight.

How fast does a 70 pound bow shoot?

If you are using a 70 lbs. draw weight, your compound bow would have a 270 FPS. And if your draw length is indeed 30″ (as it is during IBO testing), this number would be closer to 290 FPS.

You might be interested:  FAQ: What Is Arrowhead Hunting?

Which is better recurve or compound bow?

Recurve bows are lighter and easier to transport than compound bows, which often makes them great hunting bows. They’re also easier to maintain in most compound bows, due to less parts. Compound bows are the modern cousin of the recurve, and have become very popular in recent decades, both for hunting and shooting.

Is more draw weight better?

Some people are comfortable drawing 40 lbs while others are comfortable drawing 70 lbs. The more draw weight there is, the faster the arrow is going to fly. Draw weight is something that a hunter can progress with, too.

How do I know my draw weight?

To measure your draw weight, you must find the point where the draw is at its heaviest. For recurve and traditional bows this is at the end of the draw. For compound bows, this is approximately in the middle of the draw. You can use a bow scale, spring balance, or luggage scale to get the actual measurement.

How fast does a 50 lb recurve bow shoot?

Wildman, on average the 50# to 55# recurves shoot 175 fps.. I tend to agree you need a little heavier arrow, about 550 grains. To answer your question. All my recurves shoot between 160 and 200 fps with arrows that match and are of good weight.

Leave a Reply

Your email address will not be published. Required fields are marked *